|
T9006 |
|
| Printing a Self Test Status Page | |
| Memory Expansion | |
| Red & Green Led's Constantly Lit | |
| Printing a Cleaning Page | |
| Printing From DOS | |
| Printing a Self Test Status Page | |
|
To produce the Self Test page, paper must be loaded in the cassette. Press and hold the little reset button on the left hand side until both Red and Green led's illuminate. When the Red led goes out, release the button. Wait approximately 30 seconds for the Test Page to be printed |
|
| Memory Expansion | |
| The printer has only one available slot for additional memory so only one module can be used. The modules are available in sizes 4MB, 8MB & 16MB and are 72-Pin FPM (Fast Page Mode), Non Parity (32 Bit), 70nS or Faster Access Speed. You cannot use EDO Memory in this printer. Also we do not guarantee compatibility of non Tally supplied memory simms with this product. To ensure correct memory size in the Windows Driver, ensure that the Bi-Directional function is enabled in the driver. | |
| Red & Green Led's Constantly Lit | |
| This indicates that the printer is out of paper. Refill the paper cassette and press the reset button to continue printing. | |
| Printing a Cleaning Page | |
|
To print the cleaning page, follow these
instructions.
Access the Printer Driver
Properties Window. |
|
| Printing from DOS | |
|
This printer does not have
a user accessible menu so printing from DOS is a "hit and miss
affair". If you use a PCL5e driver in your DOS application, you may
find that the page(s) are printed successfully. Normal DOS printing is not supported by this printer. |