|
|
|||||||||||
|
|
|||||||||||
| Memory Expansion | |||||||||||
| Maximum Memory Configuration | |||||||||||
| Using The Finisher With The Standard Printer | |||||||||||
|
|
|||||||||||
| Memory Expansion | |||||||||||
|
The table below contains the Part Numbers for the Memory Expansion Options:-
|
|||||||||||
|
The maximum memory capacity of the T9132/T9140 is 128 MB. There are four Simm slots in the
printer. To achieve the maximum memory
you may need to replace the existing Memory Expansion boards already fitted in
the printer. The printer can then be
fitted with 4 x 32 MB Simms giving 128 MB maximum. |
|||||||||||
|
In order to have the standard T9132 & T9140
printer at the same height as the Finisher unit you must have the High Capacity
Feeder fitted underneath the actual printer.
The High Capacity Feeder is part number 080825 and comes with the Plus
Versions of the T9132 & T9140. |
|||||||||||